3/DS-Series: NC Rotary & Tilting Tables
- Range A
A precision range offering great versatility at moderate cost
A precision range offering great versatility at moderate cost
The key advantages
Application
Additional rotary and tilting axis for your machine. High accuracy and loading capacities make these tables suitable for machining and metrology applications.
Bearing
All sizes are equipped with pre-loaded axial-radial roller bearings, with a high-loading capacity in both horizontal and vertical planes. This ensures sensitivity for the fine adjustment of the table platen.
Clamping
Distortion free passive clamping by preloaded spring elements with hydraulic release.
Measuring systems
Heidenhain ROD 250/700/800/905, RON or Rotary Inductosyn are typical.
Motors
DC and AC motors.
The modular construction provides the widest possible freedom for application variations.
Application
Additional rotary and tilting axis for your machine. High accuracy and loading capacities make these tables suitable for machining and metrology applications.
Bearing
All sizes are equipped with pre-loaded axial-radial roller bearings, with a high-loading capacity in both horizontal and vertical planes. This ensures sensitivity for the fine adjustment of the table platen.
Clamping
Distortion free passive clamping by preloaded spring elements with hydraulic release.
Measuring systems
Heidenhain ROD 250/700/800/905, RON or Rotary Inductosyn are typical.
Motors
DC and AC motors.
The modular construction provides the widest possible freedom for application variations.
| Technical Data | ||||||
|
|
Unit
|
3-02
|
3-03
|
3-04
|
3-06
|
|
| Type
Designation
|
|
D200
|
D300
|
D450
|
D630
|
|
|
D250
|
D450
|
D630
|
D800
|
|||
|
|
mm
inches |
Ø200
Ø7.87 |
Ø320
Ø12.59 |
Ø450
Ø17.71 |
Ø630
Ø24.8 |
|
|
mm
inches |
Ø250
Ø 9.84 |
Ø450
Ø17.71 |
Ø630
Ø24.8 |
Ø800
Ø31.49 |
||
| T-slots (DIN 650) |
Size Number
|
mm
|
12
4 |
14
6 |
14
8 |
18
8 |
| Length |
L
|
mm
inches |
710
27.95 |
1100
43.3 |
1310
51.57 |
1565
61.61 |
| Width |
W
|
mm
inches |
335
13.18 |
500
19.68 |
815
32.08 |
960
37.79 |
| Total Height |
H
|
mm
inches |
310
12.20 |
495
19.49 |
600
23.62 |
715
28.15 |
| Diameter of centre bore |
d
|
mm
inches |
25
0.98 |
40
1.57 |
40
1.57 |
50
1.96 |
| Tilting Axis Height |
h
|
mm
inches |
180
7.09 |
320
12.60 |
360
14.17 |
385
15.16 |
| Table Top Height (0°) |
T
|
mm
inches |
300
11.81 |
400
15.75 |
500
19.69 |
635
25.00 |
| Max.
standard tilt range
|
deg
|
0-20+110
|
0-20+110
|
0-20+110
|
0-20+110
|
|
|
|
kg
lb |
300
661 |
400
882 |
700
1543 |
1400
3086 |
|
|
kg
lb |
320
705 |
450
992 |
750
1653 |
1500
3306 |
||
| Permitted
load (uniform)
|
kg
lb |
180
397 |
315
694 |
500
1102 |
800
1763 |
|
| Permitted
moment of load
|
Nm
ft lbs |
100
72 |
150
108 |
250
181 |
800
578 |
|
| Clamping
Torque (Rotary)
|
Nm
ft lbs |
800
578 |
2000
1446 |
4000
2892 |
9000
6507 |
|
| Clamping
Torque (Tilt)
|
Nm
ft lbs |
800
578.4 |
2000
1446 |
8000
5784 |
18000
13014 |
|
| Total
gear ratio (Rotary)
|
|
120:1
|
240:1
|
360:1
|
360:1
|
|
| Total
gear ratio (Tilt)
|
|
120:1
|
1200:1
|
1800:1
|
1800:1
|
|
| Parallelism
|
mm
inches |
0,02
0.0008 |
0,02
0.0008 |
0,03
0.0012 |
0,03
0.0012 |
|
| Faceplate
wobble
|
mm
inches |
0,01
0.0004 |
0,01
0.0004 |
0,15
0.0006 |
0,15
0.0006 |
|
| Runout
of Centre Bore
|
mm
inches |
0,01
0.0004 |
0,01
0.0004 |
0,01
0.0004 |
0,01
0.0004 |
|
|
Available options
|
 |
Standard Resolution 0,0001° (others on request) Standard Accuracy  15
arc seconds to 3
arc seconds (higher accuracy on request)Painted Surface Finish RAL-colour range in textured surface finish |
|
For other specifications please
contact our technical
department. (The rights for technical modifications are
reserved).
|